Edison with his Phonograph
Edison with his Phonograph In 1878 Mr Edison made a number of phonographs, which were exhibited in America and Europe, and attracted universal attention. The records were made in these on soft tinfoil sheets fastened around metal cylinders. For a while Mr Edison was compelled to suspend work on this invention, but soon returned to it and worked out the machine as it exists practically to-day. It occupies about the same space as a hand sewing-machine. A light tube of wax to slide on and off the cylinder is substituted for the tinfoil, which had been wrapped round it, and the indenting stylus is replaced by a minute engraving point. Under the varying pressure of the sound-waves, this point or knife cuts into the tube almost imperceptibly, the wax chiselled away wreathing off in very fine spirals before the edge of the little blade, as the cylinder travels under it. Each cylinder will receive about a thousand words. In the improved machine Mr Edison at first employed two diaphragms in 'spectacle' form, one to receive and the other to reproduce; but he has since combined these in a single efficient attachment.
Bicycle Locomotive No. 2
Bicycle Flat Car
Bicycle Locomotive No. 1
Bicycle Box Freight Car
Bicycle Coal Car
Single Bicycle Elevated Structure
Single Electric Bicycle Structure
Single Post, Double track, Steel Elevated Bicycle structure
Screenshot (35767)
Sectional View of Bicycle Motor Car
Side view of bicycle motor wheel
Combiined Elevated and Surface Structure
Cross Section of Bicycle Structure and Bicycle Electric Car
Elevated Double Track Georgia Pine Structure
Elevated Railroad Station
Screenshot (35750)
Bicycle Palace CAr
Bicycle Railway Switch
Bicycle Sleeping and Accommodation Coach
Bicycle sytem applied to N.Y. Elevated railway
Bicycle Locomotive No. 3
Type of Magneto Telephone
Conversion from Vibration to Voice Currents. The figure illustrates a simple machine adapted to translate motion of a diaphragm into an alternating electrical current. The device is merely one form of magneto telephone chosen to illustrate the point of immediate conversion. 1 is a diaphragm adapted to vibrate in response to the sounds reaching it. 2 is a permanent magnet and 3 is its armature. The armature is in contact with one pole of the permanent magnet and nearly in contact with the other. The effort of the armature to touch the pole it nearly touches places the diaphragm under tension. The free arm of the magnet is surrounded by a coil 4, whose ends extend to form the line.
Cash Register 2
The trouble was that the knuckles, being necessarily oiled, held dust and dirt which interfered with their free movement. And again, a "five-cent" or "ten-cent" key would be used more than others, and hence would become more worn. As a practical result the tablets did not drop when wanted, and the whole operation was thrown into confusion. When one tablet went up the other tablet stayed up, leaving a false indication. The most valuable modification now made by these Dayton inventors was to cease to rely on the knuckle to move back the supporting bar, and to supply the place of this function by what became known as "connecting mechanism," especially designed for this purpose. This was placed at the other, or say the left, side of the machine as you faced it. Cut No. 2 shows this new connecting mechanism. The keys, when pressed, performed the functions as before, on the right side of the machine, viz. to ring an alarm-bell, etc.; but on the other, or left, side the key, when pressed, operated the connecting mechanism marked M, N, O, P, and Q. The key pressed down by its leverage pushed back a little lever (Q), the further end of which pressed back the supporting bar F, and released the previously exposed indicator G, without relying on the knuckle to perform this function.
Cash Register
The origin of the cash register is rather nebulous, because twenty-five years ago several men were working on the same idea. It first appeared as a practical machine in the offices of John and James Ritty, who owned stores and coalmines at Dayton, Ohio. James Ritty helped and largely paid for the first experiments. He needed a mechanical cashier for his own business, and says that, while on an ocean steamer en route to London the revolving machinery gave him the suggestion worked out, on his return to Dayton, in the first dial-machine. This gave way to the key-machine with its display tablet, or indicator, held up by a supporting bar moved back by knuckles on the vertical tablet rod. The cut shows the right side of this key register, the action of which is thus described by the National Cash Register Company. The key A, when pressed with the finger at its ordinary position—marked 1—went down to the point marked 2. Being a lever and pivoted to its centre, pressing down a key elevated its extreme point B. This pushed up the tablet-rod C, having on its upper part the knuckle D. This knuckle D, pushed up, took the position at E; that is, the knuckle pushed back the supporting-bar F, and was pushed past it and held above it. If the same operation were performed on another key, the knuckle on its vertical rod, going up, would again push the supporting bar back, which would release the first knuckled rod, and leave the last one in its place. This knuckled rod had on its upper end the display tablet, or indicator G
Hero's Altar Engine
A third apparatus [from Hero] was merely an elaboration of the second, in that the sphere was connected with an altar which supported a large drum on which were figures representing human beings. The fire being lighted, the sphere would soon begin to revolve, and with it the drum; and the figures on it would seem to dance around, above the altar. The invention was probably to impress the people with the idea that the priests were exerting supernatural power.
Leupold's Engine
In 1725, Jacob Leupold invented an engine, in which the work was done by steam alone, instead of by the atmosphere, as in the engines that immediately preceded it. Leupold used two cylinders. They were open at the top to the atmosphere as in the others, but154 he used higher pressures of steam, and arranged a four-way cock between the bottoms of the two cylinders in such a way that the bottom of each cylinder, in its turn, was connected to the boiler or to the open air. Each cylinder actuated directly a separate vibrating beam, which in turn actuated the piston of a pump; the two pistons acting reciprocally, each drawing up water in its turn. In 1765, James Watt made the very great improvement of providing a condenser separate from the cylinder of the engine, so that the great loss of heat caused by cooling the cylinder and then heating it at each stroke was wholly avoided. He covered the cylinder entirely, and surrounded it with an external cylinder kept always full of steam, that maintained the cylinder at a high temperature. The steam, instead of being condensed within the cylinder, after it had done its work, was allowed to escape into the condenser. To facilitate this action, the condenser was fitted with an air-pump that maintained a good vacuum in it. In 1769, Watt invented an improvement that consisted mainly of means whereby the supply of steam to the cylinder could be shut off at any desired part of the stroke, and the steam allowed to complete the rest of the stroke by virtue of its expansive force. This invention increased tremendously the efficiency of the engine: that is, the amount of work done with a given amount of steam.