« 2020
2022 »
January
February
March
April
May
June
July
August
September
October
November
December
All
- A Chest-deepener
Again, to deepen the chest from front to back, he hangs two bars, B and C, and attaches the weight at the other end, A, of the rope, the bar B, when at rest, being about a foot above the height of the head. Standing, not under B, but about a foot to one side of it, and facing it, grasp its ends with both hands, and keeping the arms and legs straight and stiff, and breathing the chest brimful, draw downward until the bar is about level with the waist. Let the weight run slowly back, repeat, and go on. - A Chest-widener
Dr. Sargent's ingenuity has provided a simple and excellent chest expander. He rigs two ordinary pulleys over blocks some feet above the head, and from five to six feet apart, and attaching weights at the floor ends of the ropes, puts ordinary handles on the other ends, and has the ropes just long enough so that when the weights are on the floor the handles are about a foot above the head. Now stand between and directly under them, erect, with the chest as full as you can make it, and keeping the elbows straight, and grasping the handles draw your hands slowly downward out at arm's-length, say about two feet. Next, let the weights drop gradually back, repeat, and so go on. This is excellent for enlarging the whole chest, but especially for widening it. A better present to a consumptive person than one of these appliances could hardly be devised. - A Correct Position for Fast Walking
- A Monk Copying Manuscript Books
- A Sharp Curve—Manhattan Elevated Railway, 110th Street, New York
Equally valuable improvements were made in cars, both for passengers and freight. Instead of the four-wheeled English car, which on a rough track dances along on three wheels, we owe to Ross Winans, of Baltimore, the application of a pair of four-wheeled swivelling trucks, one under each end of the car, thus enabling it to accommodate itself to the inequalities of a rough track and to follow its locomotive around the sharpest curves. There are, on our main lines, curves of less than 300 feet radius, while, on the Manhattan Elevated, the largest passenger traffic in the world is conducted around curves of less than 100 feet radius. There are few curves of less than 1,000 feet radius on European railways. - A Switchback
Another American invention is the switchback. By this plan the length of line required to ease the gradient is obtained by running backward and forward in a zigzag course, instead of going straight up the mountain. As a full stop has to be made at the end of every piece of line, there is no danger of the train running away from its brakes. This device was first used among the hills of Pennsylvania over forty years ago, to lower coal cars down into the Nesquehoning Valley. It was afterwards used on the Callao, Lima, and Oroya Railroad in Peru, by American engineers, with extraordinary daring and skill. It was employed to carry the temporary tracks of the Cascade Division of the Northern Pacific Railroad over the "Stampede" Pass, with grades of 297 feet per mile, while a tunnel 9,850 feet long was being driven through the mountains. - A warped Professional Sculler, imperfectly developed in Muscles not used in Rowing
The figure represents one of the swiftest and most skilful professional scullers of the country to-day. - A warped University Oarsman, imperfectly developed in Muscles not used in Rowing
With professional oarsmen, who for years have rowed far more than they have done anything else, and who have no especial care for their looks, or spur to develop harmoniously, the defects rowing leaves stand out most glaringly. The man in the figure is one of the most distinguished student-oarsmen America ever produced. - Abraham Lincoln
Abraham Lincoln - Abraham Lincoln
Abraham Lincoln - Abraham Lincoln
President-Elect - Alexander Graham Bell in 1900
- Apples
- Appliance for developing the Sides of the Waist
If one prefers to use apparatus made specially, the cut shows a simple device of Dr. Sargent's, which he made purposely to bring up and strengthen these muscles. Standing in front of it, with head and neck erect and chest out, and grasping the ends of the bar A A', the operator simply turns it, first well up to the right, then to the left, and then repeats the movements until he has enough. As he turns, the rubber straps B B stretch more and more, of course getting stiffer the farther the bar is turned. It would scarcely be possible to hit upon a [p.218]better appliance for improving these valuable side muscles, and yet without fear of overdoing them. - Ballet dancer
- Ballet Dancer
- Ballet on stage
- Beginning a Tunnel
Tunnels are neither so long nor so frequent upon American railways as upon those of Europe. The longest are from two to two and a half miles long, except one, the Hoosac, about four miles. Sometimes they are unavoidable. The ridge called Bergen Hill, west of Hoboken, N. J., is a case in point. This is pierced by the tunnels of the West Shore, of the Delaware, Lackawanna, and Western, and of the Erie, the last two of which, are placed at different levels to enable one road to pass over the other. It is by our system of using sharp curves that we avoid tunnels. It may be said, in general terms, that American engineers have shown more skill in avoiding the necessity of tunnels than could possibly be shown in constructing them. When we are obliged to use tunnels, or to make deep cuttings in rocks, our labors are greatly assisted by the use of power-drills worked by compressed air and by the use of high explosives, such as dynamite, giant powder, rend-rock, etc. Rocks can now be removed in less than half the time formerly required, when ordinary blasting-powder was used in hand-drilled holes. - Bell's Telephone in March, 1876
- Birthplace of Charles Goodyear
- Captain John Smith’s Map of New England
The Pilgrims were familiar with Capt. John Smith’s account of a voyage in which he had surveyed the coast from Cape Cod to Penobscot Bay in 1614. He had even offered his services as guide and military captain, but Myles Standish got the job. Undoubtedly they did bring with them his Description of New England (London, 1616), in which the following map was published. Capt. Smith, who had already gained some fame and fortune in Virginia, dedicated to Prince Charles this effort in which the term “New England” first appeared: “... it being my chance to range some other parts of America, whereof I here present your highness the description in a map, my humble suit [in original, “sure”] is you would please to change their barbarous names for such English, as posterity may say Prince Charles was their godfather.” Several English place-names were incorporated in the map, but posterity disregarded most of them, a noteworthy exception being “Plimouth.” Smith notes that the Indians called the site “... Accomack, an excellent good harbor, good land, and no want of any thing but industrious people,” recalling that “After much kindness, upon a small occasion we fought also with 40 or 50 of those [Indians]; though some were hurt and some slain, yet within an hour after, they became friends.” - Cattle
In April, 1869, a charter was granted by the state of Illinois to the East St. Louis Stock Yards Company. This company was authorized to issue stock to an amount not to exceed $200,000. The original charter of the company, which later operated the National Stock Yards, fixed the capital stock thereof at $1,000,000, which was, subsequently, raised, by a vote of the stock holders, to an amount of $250,000, to meet the requirements of the rapidly growing business. When the National Stock Yards were completed, they were more convenient than were any others of their kind in the country. - Charles Goodyear
- Cheapside in London
- Clown Notice
- Curved Stereotype Plate
- Dancer
- Dancer
- Dancer
- Dancer
- Dancer
- Dancer
- Dancer
- Dancer
- Dancer
- Dancer
- Dancer
- Dancer
- Dancer
- Dancer
- Dancer and Guitarist
- Dancers
- Dancers
- Dancers
- Dancers
- Dancers
- Dancers
- Dancers
- Dancing
- Daniel Webster
- Device for developing the Abdominal Muscles
The latest invention purposely for these muscles is also one of Sargent's, on the following plan: The pupil lies on the plank A A', or, rather, sits on it, when A' is a little back of vertical, so as, for instance, to form with A the angle A B A'. With feet in the toe-straps C C', he sways gently forward and back as long as he can without fatigue. From day to day, as these muscles gain strength, A' is dropped lower and lower, until finally it is on a level with A. Or a strap may be placed over the forehead and fastened to A', and, with the feet in the toe-straps, the person may lift his body up till vertical, drawing the weight E with him as he rises. - Divider - dancers
- Dom Pedro II
- Early Settler Homestead
About 1820, the State of Illinois was being rapidly settled by people from the eastern states. Prior to this time, very few white settlements had been made in the state. These early pioneers, drawn from the population of the eastern states, were composed of almost all nationalities. They pushed their way across the mountains of Pennsylvania and Virginia in crude wagons, drawn by oxen, bringing with them their household goods and a few milk cows. They came into Illinois, built new homes, and laid out new fields on the broad, unsettled prairies. - Edison in his Library
- Edison's First Phonograph
- Elias Howe
- Engineers in Camp
A full surveying party consists of the front flag-man, with his corps of axe-men to cut away trees and bushes; the transit-man, who records the distances and angles of the line, assisted by his chain-men and flag-men; and lastly the leveller, who takes and records the levels, with his rod-men and axe-men. The chief of the party exercises a general supervision over all, and is sometimes assisted by a topographer, who sketches in his book the contours of the hills and direction and size of the watercourses. One tent contains the cook, the commissary, and the provisions; another tent or two the working party, and another the superior engineers, with their drawing instruments and boards. In a properly regulated party the map and profile of the day's work should be plotted before going to bed, so as to see if all is right. If it turns out that the line can be improved and easier grades got, or other changes made, now is the time to do it. - Erection of a Cantilever
The new bridge at Poughkeepsie has three of these cantilevers, connected by two fixed spans, as shown in the illustration. The fixed spans have horizontal lower chords, and really extend beyond each pier and up the inclined portions, to where the bottom chord of the cantilever is horizontal. At these points the junctions between the spans are made, and arranged in such a way, by means of movable links, that expansion and contraction due to changes of temperature can take place. The fixed spans are 525 feet long. Their upper chord, where the tracks are placed, is 212 feet above water. These spans required stagings to build them upon. These stagings were 220 feet above water, and rested on piles, driven through 60 feet of water and 60 feet of mud, making the whole height of the temporary staging 332 feet, or within 30 feet of the height of Trinity Church steeple, in New York. The[35] time occupied in building one of these stagings and then erecting the steel-work upon it was about four months. The cantilever spans were erected without any stagings at all below, and entirely from the two overhead travelling scaffolds, shown in the engraving. These scaffolds were moved out daily from the place of beginning over the piers, until they met in the centre. The workmen hoisted up the different pieces of steel from a barge in the river below and put them into place, using suspended planks to walk upon. The time saved by this method was so great that one of these spans of 548 feet long was erected in less than four weeks, or one-seventh of the time which would have been required if stagings had been used.